Stylus Streamline for fathers day

It's fathers day tomorrow in Australia, but as usual it's the question of what to get a Dad who has everything.  Both my Father and Father-in-law love their IPads, so I thought why not knock up a stylus.  Now the stylus kits are Slimlines, but I wanted something a little more, what's the word, refined maybe.  So I decided to make a one piece Streamline, and a One piece Slim, both are essentially the same.

While I am showing the off, here is the quick tutorial! Firstly select a long enough blank, as there is no centre band this needs to taken into account when cutting.  I cut the blank to about 118mm and trim to 113mm when I stick in the tube.

You need a long drill bit (7mm).  As it is a long blank you can drill it on the lathe or drill press.  With the whole drilled we need to glue in one of the two brass tubes that are found in the standard kit.

Put the blank aside, let the glue dry and then trim the ends with the barrel trimmer.  Now it's time to turn!  Using the pen mandrel use the Streamline/Slimline bushing at one end, slide on the blank from the glued tube end.  Then slide on the spare brass tube and insert it into the blank on the mandrel.  Fix the other end bushing and secure the blank with the brass nut or mandrel saver. 

Turn the blank to the required shape. I like to leave a little curve in mine.  Once turned wet sand the acrylic from 150 wet and dry paper through to 800, then micro mesh.  For a real shine I then give it a rub with Brasso and then car polish.

Next step is to remove the barrel from the mandrel.  Now remove the lose brass tube.  Get the pen kit and squeeze the nib and mechanism into the lose brass tube with care.  

Fix the stylus and clip to the clip end where the brass tube is glued in.  Screw in the pen refil to the mechanism and push it into the barrel.  The glued brass tube will grab the end of the refil, to extend and retract the pen just twist the nib end.

Now the pen is ready to give dad

What gift are you giving dad?